Tips and tutorials
Coil turning, clockwise vs counterclockwise
What you need:Before we start: Tip 1. For beautiful round coils, use coils with smaller gauge. Wire with bigger gauge is harder to turn without making it unevenly. ( Smaller gauge = Thicker diameter)
Tip 2. Important note: Do turn your coils CLOCKWISE. Some emphasize it, others don't. But from my experience there is a big difference between cw coils en ccw in orgonite. My orgonite with ccw coils did not feel good.
Step 1.
Chose the length of the wire. Doesn't really matter. It's how big that you prefer the endresult.
Mine was about 22 cm long.
Step 2. Buy a good plier and use that for the twisting process.
Take a hold of the wire. Then, turn the wire to opposite sides. The left side has to go to the front, and the right side to the back. It's important, if you do it the other way, the coil will go ccw.
Take a hold of the wire. Then, turn the wire to opposite sides. The left side has to go to the front, and the right side to the back. It's important, if you do it the other way, the coil will go ccw.
Turn them the other way until they are straight each side is pointing straight forward.
Step 3.
Take it of the plier, and twist it around. I like it when there are no spaces between the layers of the turned around wire. If your wire is thick enough, it will go easily. But if the diameter is too small, its harder to make it nice and even. You can use your dumb to measure the way it has to turn But with thick wires you can just push it in the right direction and it will turn out good.
Take it of the plier, and twist it around. I like it when there are no spaces between the layers of the turned around wire. If your wire is thick enough, it will go easily. But if the diameter is too small, its harder to make it nice and even. You can use your dumb to measure the way it has to turn But with thick wires you can just push it in the right direction and it will turn out good.
Step 4.
You're done.
